Guangzhou Auro Beauty Equipment Co., Ltd.
Main products:Beauty Equipment,electro muscle stimulator,high frequency,no needle mesotherapy,skin scrubber
Products
Contact Us
  • Contact Person : Ms. Feng Felicia
  • Company Name : Guangzhou Auro Beauty Equipment Co., Ltd.
  • Tel : 86-020-61145949
  • Fax : 86-020-61145949
  • Address : Guangdong,Guangzhou,Room 38B, 5th Floor, Beauty Exchange Center No.121 Guangyuanxi Road, Guangzhou, China
  • Country/Region : China
  • Zip : 510000

Ozone Facial Steamer with Magnifying Lamp Au-900E

Ozone Facial Steamer with Magnifying Lamp Au-900E
Product Detailed
Ozone Facial Steamer with Magnifying Lamp Au-900E 1.Open up skin pores for deep cleansing 2.Moisten skin 3.Ozone kill bact

Ozone Facial Steamer with Magnifying Lamp Au-900E

General introduction:

    This facial steamer is used to clean the skin thoroughly by opening the pores in order to remove impurities (such as blackheads, whiteheads, make up, etc.) and generally revitalize the skin.  The addition of ozone enriched steam helps to promote a more sterile environment for further treatment of the skin.

Operations:

Adjust the height of steamer. Avoid bumping the equipment.

1.Fill the glass jar with distill water only through water funnel, do not exceed the red warning line.  Make sure the jar is attached firmly and perfectly to the steamer.

2.Connect power plug. Turn power on, power indicator should light up.  Steam will come out within 10-15 minutes after the power is switched on.

3.Turn ozone on only when steam comes out.  Ozone indicator should light up.  Do not turn ozone on when there is no steam.

4.Position steam jet to aim at clients chin and steam should move over his/her entire face.

5. Turn off ozone first, and then power when finishing.

6. Unplug power socket and wait till the glass is cool before removing it from the machine.

7. To stop steaming during operation,please turn off power and ozone switches.

8.For safety purpose, the machine will shut off automatically when water level is below the heating element.

Cleaning instructions for facial steamer:

1.Glass jar and heat element should be cleaned at least once a week with distill water.

2.Clean residues from heating element by using clean distill water and soft cloth.  Do not use any metal or abrasives materials for cleansing.

3.Do not lose the rubber band on top of the glass jar.  It is used to prevent water spilling out.

Cautions:

1.When perform facial steaming, client may feel breathless or hard to breathe if spray steam directly towards nose.

2.Don't steam too long, otherwise skin may become dry.  Don't steam too close,otherwise it is too hot for skin. Do not turn ozone on for sensitive, capillaries and pigment skins.

3.Only distill water is allowed to fill in the glass jar. Other product or liquid (e.g. essential oil) is not allowed.

4.Distill water should be under the warning line, otherwise boiling water may splash out from both spray head and glass jar.

5.Do not touch or remove the glass jar when machine is in use.

6. Make sure the steamer is off and cool before cleaning.

7. Be sure the machine is off and jar is cool before filling refill of distill water if it is required.

Specification:Voltage: 110V/220V

Frequency:50-60Hz

Power: 775W

G.W. 12kg

L*W*H: : 84.5×41.5×36.5 cm

Ozone Facial Steamer with Magnifying Lamp Au-900E



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.